Fogger V2 Atomizer

£24.99 £19.99

Out of stock

SKU: FGATMZRV2. Category: , .

Product Description

If you are looking for a high performance atomizer then this is something you should consider. The Fogger V2 Atomizer can perform extremely well when it comes to vapour and flavour production for a perfectly satisfying vape.

We now stock the new Fogger V5 Atomizer.

The tank body is constructed with quality stainless steel all round with a brushed aluminium matte finish which looks quite stunning on almost all ecig mods we have tried this beauty on. The tank glass cover is made with Pyrex Glass so you don’t need to worry about juices that are prone to breaking tanks.

Our Fogger V2 kit comes with all the bits and pieces you would need to get this setup correctly and get vaping. The tank comes pre-coiled with stainless steel mesh and kanthal wire setup which is good enough to produce a decent vape. However we have found silica and cotton wicks perform a lot better than steel mesh.

The second batch has been dispatched to our customers on 18/10/2013

The first batch has been dispatched to our customers on 03/09/2013

Package Contents

  • One unit of the Forger V2 Atomizer (pre-assembled, wicked and coiled)
  • One unit Stainless Steel Fogger Drip tip
  • One extra unit of steel mesh
  • One unit Screwdriver
  • Five pieces of Kanthal Wire
  • Everything comes in a Gift box

Device Specs

  • Material : Pure stainless steel (Matte color)
  • Diameter:22mm
  • Length :80mm /w Drip tip *Pyrex glass
  • Capacity: 6ml
  • Airflow Adjustment System
  • Adjust thread length design to suit different battery lengths
  • Come with 400steel mesh wick & Kanthal
  • No solder, flux or wire in the entire atomizer

Don’t foget to check out the new Fogger V3 Atomizer.

4.00 out of 5

4 reviews for Fogger V2 Atomizer

  1. 1 out of 5

    (verified owner) – :

    This is no reflection on RealVapes who sent the Fogger v2 on almost as soon as stock entered the country, and I am sure many of you will be pleased with it, but, the Fogger v2 is a piece of junk.

    The coil supplied basically shorted on first use – not to worried as I expected this (see Youtube). So I went ahead and started a rebuild – it is extremely awkward attaching the kanthal to the posts and with very little pressure I managed to pop out both the posts they went back in easy enough but as they are press fit as soon as I then started to tighten to grip the kanthal they just turn and refuse to grip the kanthal.

    Tried to get this sorted for about 2 and a half hours – no joy. The Fogger v2 ended up in the bin in frustration!

    Your value may differ but that was the biggest waste of £28 in my life.

  2. 5 out of 5

    (verified owner) – :

    Thank you Realvapes! For a great product at a great price! As this is my first rebuildable atomiser i couldnt believe that on my first build i had the best vape ive ever had! I did watch a few youtube videos on how to build it and i must say they helped a lot! So again Realvapes thank you for great service! I will be happy to shop with you again

  3. 5 out of 5


    This is my first RBA so I cant comment on how it compares but coming from an evod WOW. I was a little worried after reading people having trouble getting it set up right but I had no shorting issues and after whipping the SS wick out (too many dry hits) and putting 2mm Ekowool with 4 wraps of the res wire that came with the fogger and a piece of 1.5 mm silica on top (no o-ring) its working absolutely perfectly. Tons of vapor, no dry hits, no gurgling. Pleased as punch :) Thanks Realvapes.

  4. 5 out of 5

    (verified owner) – :

    Been reading mixed reviews of this atty, and can only go on the one I got from Real vapes, On receiving, I checked the resistance, the pre-made setup was 1ohm so no shorts, and had no need to modify. However did give a 10 minute blast in ultra sonic cleaner before using, like any other device.

    - Rebuilding -
    Removed the pre-fitted hybrid wick, and rubber o’ring for wicks, and replaced with a 2ohm 3mm diameter micro coil and cotton wool. Its very fiddly to attach wires to posts, as there isn’t much room, Hopefully I won’t have to recoil for months, just change the cotton. Didn’t bother replacing the wick o’ring and haven’t had leaking issues.

    - Vaping -
    … what I can say? it performs very well, flavour is very good, every now and when chain vaping the flavour dies back a bit, however with the adjustable air control, you can close off the air intake and take a good draw and re-purge the wicks. I use 70/30 PG/VG juice.

    - Conclusion -
    Better flavour and looking than Kayfun. Fiddly to set up, build quality is fine for price. Overall a good purchase, and good vape. Time will tell to see how it performs, but for now I’m very happy with it. Thanks real vapes.

Add Review

Add a review